Alfa Romeo 2600 Spider restoration - Stripping down 1

Got quite a bit done over the last couple of weeks. Engine & gearbox are out and they are big!! 


Took out the fuel tank and after close inspection I am amazed to say that it has no rust!!! Even inside is clean.

Inside the tank

The car has the original clutch mechanism which is serviceable and just needs a new plate.

I spent a few very dirty hours degreasing and power washing the underside and suspension in readiness to drop out the rear axle and front suspension. I pleased to say that the underside of the car also seems more or less rust free.

Now to parts for the rebuild. I have spent a good few hours finding, ordering and storing parts ready for the rebuild. I'm managing to find most of what I need, but the list of suspension and rubber parts is long. Regarding the engine I'm replacing all the serviceable parts and adding a new electronic ignition. Once the engine is fully stripped I will no doubt have a few extra bits to find.






Location: Pershore, Worcestershire

Comments

Post a Comment

Popular posts from this blog

Alfa Romeo 2600 Spider restoration - August 2025 update

Image
Big progress has been made throughout the summer. The car was moved from my garage to a company who allowed me to work on the car on their lift and provided extra hands for the heavy lifting of the engine etc. Engine & Gearbox The engine and gearbox is in, biggest hoist ever!! The heritage throttle bodies are fitted and looking the part and the harness for the fuel injection is finished for the injectors, knock sensor and lambda. The throttle control bar was well worn, so I had a small engineering shop create a new hollow bar and re-bush the casting. The exhaust has been fitted with the lambda sensor adapter. Cooling system The radiator and oil cooler have been fitted. We did have a problem with the drain tap on the block which leaked and had to be replaced, quite difficult to get at once the engine was in!!  We also had to do some remedial work on the output that is situated on top of the water pump, in short it had rotted through and I hadn't seen it. It required drilling a...
Read more

Alfa Romeo 2600 Spider recommissioning commences - Sept 2022

Image
This all started in September 2019 when my ever understanding wife said lets go to the motor museum, now the understanding bit comes in as we were on holiday in Malta so having the opportunity to indulge in a few cars was a real holiday bonus. A quick bus ride found us meandering around the many exhibits.  Malta Museum As a self confessed petrolhead there were lots of distractions however the group of red cars really caught my eye. What looked like original unrestored Italian beauties stopped me in my tracks. Malta car museum I've never really been an Alfa guy, not for any real reason, just never owned one. In fact I can't remember even being in one. My car history, forgetting the boring day to day cars is a real eclectic mix from an original Honda NSX, one of the last air-cooled Porsche 911 (933) and more recently VW based Porsche 356 replica which I finished during lock down. So finding myself nearly 3 years on as the owner of a 1964 2600 Spider, one of only 102 rhd made, I’m...
Read more

Alfa Romeo 2600 Spider restoration - December 2024 update

Image
More body work On close inspection both door skins were in need of replacement. These new door skins were made and from scratch (thanks David!)  The car went off to the paint shop in May 2024, so over the summer I finished off any part restoration that remained. The engine rebuild is also coming along, more on that in the net update.  Manifolds I have had all the manifolds and air plenum aqua blasted. The intake manifold has been de-Siamesed ready for the new throttle bodies. After a long wait the car finally came back from the paint shop in December 2024, now at last I can start putting the car back together!!
Read more